Followed Baddabing's guide to xlobby & KISS

[john_m_92627]

I reinstalled Xlobby to the guide and now I get an error at start up. It says"The application failed to initialize properly (0x000135) Click on OK to terminate. Thanks for the help.. John.

[BaddaBing]

Did Xlobby start and run before you installed the KISS skin? After you do the basic instal launch xlobby to make sure it works first. Then do the skin install.

A. Make sure .NET is installed

B. To install Xlobby you will need the following files:

-1] xlobby2pre14.zip - from the Xlobby download page

-2] xlobby2main.zip - from the Xlobby download page

-3] xlobby2.exe - from the Xlobby download page

There is currently no automated installation routine for Xlobby. The downloaded files are simply extracted to a directory. To UNINSTALL Xlobby, simply delete the directory to which Xlobby was installed, Xlobby makes no registry or OS changes.

Install Xlobby by extracting the downloaded zip files to the Xlobby directory in the following order

-1. xlobby2pre14.zip – Unzip the contents of this file to C:\XLOBBY

-2. xlobby2main.zip - Unzip the contents of this file to C:\XLOBBY. If you are prompted to overwrite files answer – YES.

-3. xlobby2.zip - Unzip the contents of this file to C:\XLOBBY. If you are prompted to overwrite files answer – YES.

-4 Start xlobby and make sure it loads with the default skin - then start making changes.

[john_m_92627]

This is a completely new machine. I did not try and run without the default skin. I will try deleting everything and running with the default skin and add the KISS skin later. I did everything else as stated in the post. Thanks, John...

[john_m_92627]

I only had the SDK .NET installed. Installed the right .NET and all is good.
Thanks, John...