What PDA do you use?

Speak your mind

What PDA do you use?

Postby MacReady on Thu Nov 11, 2004 7:28 pm

I was just wondering what PDS'a people use here?

Im going to make a system for my car, mainly a MP3 jukebox, and will control it via a PDA on the dash :) Probably been done a few times here, but it fits what I need for my car perfectly.
MacReady
 
Posts: 8
Joined: Thu Nov 11, 2004 7:14 pm
Location: UK

Postby hjackson on Fri Nov 12, 2004 4:33 am

I use an Ipaq.

hjackson
hjackson
 
Posts: 371
Joined: Sat Nov 29, 2003 7:12 am
Location: Tampa, Florida

Postby rogo on Fri Nov 12, 2004 8:43 am

I recently bought an IPAQ RX3715, it works very well with xlobby.

Ron
rogo
 
Posts: 5
Joined: Tue Jul 20, 2004 2:41 am
Location: Australia

Postby lar282 on Fri Nov 12, 2004 8:57 am

I will get my ipaq 5450 (I think) and HOPE it will work


//Lasse
lar282
 
Posts: 1624
Joined: Thu Apr 01, 2004 4:13 pm
Location: Helsingborg, Sweden

Minimum requirements...

Postby briands on Fri Nov 12, 2004 3:12 pm

Not to hijack the thread, but wandered if anyone had more details. What are the minimum requirements (processor and memory).

Does everyone use wifi? Is bluetooth a viable option?

Also, might as well get the feedback from those who have had failures...

I need to know what to ask Santa for...
briands
 
Posts: 84
Joined: Fri Oct 29, 2004 6:31 pm
Location: Louisville

Postby MacReady on Fri Nov 12, 2004 6:36 pm

Actually briands I was thinking the same things ;)
MacReady
 
Posts: 8
Joined: Thu Nov 11, 2004 7:14 pm
Location: UK

Postby rhinoman on Fri Nov 12, 2004 7:03 pm

I've been thinging about the car pc thing for sat nav and mp3 playback and xlobby is an obvious glue to integrate evrything but I was thing along the lines of a regular touchscreen, I'd not thought of using a PPC, obvious now you mention it because it works great around the house.

I installed xlobby on a integrated via 1000mhz cpu/mobo 256mb ram combination for my folks and other than traking a while to boot it worked ok. This is the equivelent of a p3 650 ish processor so very low by todays standards.
rhinoman
 
Posts: 416
Joined: Wed Jan 14, 2004 8:58 pm
Location: Herne Bay, UK

Postby MacReady on Fri Nov 12, 2004 7:42 pm

We meant the minimum requiremetns of the PPC :)
MacReady
 
Posts: 8
Joined: Thu Nov 11, 2004 7:14 pm
Location: UK

Postby rhinoman on Fri Nov 12, 2004 7:48 pm

doh....

I use an axim which can automatically slow the processor and I've never seen it above the slowest (200 I think).

I did try it on an older HP something or other abd the limitation was not the speed but the graphics were of a much lower quality.
rhinoman
 
Posts: 416
Joined: Wed Jan 14, 2004 8:58 pm
Location: Herne Bay, UK

Postby stevenhanna6 on Mon Nov 15, 2004 10:07 pm

I use an old dell axim also with a compact flash 802.11b wifi card. A 400mhz pocket pc with a wifi card should be fine. I dont know if you can get an 802.11g yet on a pocket pc but I would go for that, because from my experience the actual bottle neck for the pocket pc client is the transmission speeds. And someone asked about bluetooth, I remember a guy trying that and its was slooooow and the range was poor.
stevenhanna6
 
Posts: 904
Joined: Tue Feb 18, 2003 10:39 am
Location: Ontario, Canada

Postby MacReady on Mon Nov 15, 2004 10:33 pm

Thanks for that :)

I will have a look round at them.
MacReady
 
Posts: 8
Joined: Thu Nov 11, 2004 7:14 pm
Location: UK

Postby Naylia on Mon Nov 22, 2004 5:35 pm

I also have a dell axim. Hoping to set it up this week!

EDIT: Dell Axim X5 with Netgear Wireless-B card (MA702 I think). Works great!
Last edited by Naylia on Tue Nov 23, 2004 5:25 pm, edited 1 time in total.
Naylia
 
Posts: 530
Joined: Tue Oct 19, 2004 7:50 pm
Location: Boston, MA

Postby Cosworth on Mon Nov 22, 2004 6:31 pm

Dell axim X3i
Cosworth
 
Posts: 67
Joined: Tue May 11, 2004 10:46 am
Location: Denmark

Postby Aaron on Tue Nov 23, 2004 5:16 pm

I use a Siemans SimPad SL4 (800x600) with WinCE4.1 .net
Aaron
 
Posts: 299
Joined: Fri May 07, 2004 3:50 am

Postby TonyNo on Wed Nov 24, 2004 3:27 am

I just picked up an HP iPAQ rx3115 from Circuit City for $299 (open box, normally $349). A good deal for a unit with 802.11b and Bluetooth built-in. It runs Windows Mobile 2003.

I'm setting everything up now, and, I am finding problems with Pocket IE (unsupported stuff such as image links and some JavaScript not working).
TonyNo
 
Posts: 13
Joined: Mon Sep 06, 2004 4:49 pm

Next