xlobby2sd not starting

by **another_bob67** on Mon Dec 20, 2004 7:39 am

I am getting the following error when I try to run xlobby2sd on my ipaq 4155.

Connect() error, Class:ClientSytem.Net.Sockets.SocketsExeption:Could not find resources assembly

I have servers.txt as follows and have tried just about all the other examples as well:

Code: Select all: server:192.168.0.103 screen:ppcmenu resolution:auto quality:100% navigationpad:true unbindbuttons:340,300

I found the post about the 4705 that has the link to test the .Net install and have run that and it works.

http://www.ipaqhq.com/forums/showthread.php?t=10339

I am running a firewall and have ports 8000 and 8001 open.

So what am I doing wrong?

by **another_bob67** on Mon Dec 20, 2004 9:59 am

Ok, I don’t get the error anymore (I was using the 12Kb xlobby2sd file not the 44 Kb version) but it still doesn’t work.

When I start the xlobby2sd and have the ip address set to 192.168.0.103 in servers.txt the PPC will freeze and I have to power down to get it working again. If I change the address in servers.txt to 192.168.0.xxx (anything but 192.168.0.103) then it tells me it can’t find the server. If I delete the servers file it tells me it can’t find the servers file. I’ve disabled the firewall and tried all of this too.

Servers.txt currently looks like this:

Code: Select all: server:192.168.0.103 screen:ppcmenu

by **paulg100** on Thu Jan 06, 2005 9:22 pm

Any help on this issue would be great as i had exactly the same first issue amd now am getting the second one..

by **another_bob67** on Thu Jan 06, 2005 9:48 pm

I have it working now. I changed the servers file to:

Code: Select all: screen:ppcmenu server:192.168.0.103

and it started working. I don't have a answer for how or why this change made a difference.

by **jowaldo** on Thu Jan 06, 2005 11:11 pm

hmm so just the order of it made a difference?

by **another_bob67** on Fri Jan 07, 2005 5:03 am

Well it could be just vodoo but that's all I did before it started working.